Serial Unipolar Ym2754 Stepper
[9 results priced between $5$150]

Sort:
9 serial unipolar ym2754 stepper $5 $150 /l/serial-unipolar-ym2754-stepper
  • Serial Stepper Motor Controller 12VDC
    Serial Stepper Motor Controller 12VDC

    Connects to the PC serial port and provides an easy to use interface for connecting and controlling stepper motors by your PC. You can connect up to four Leadshine Microstepping drives, KTA-191 Bipolar Chopper Drive, or KTA-179 Unipolar Stepper Motor Drivers to the card using their step and direction signals. You can multidrop up to 4 interface cards off the 1 RS232 serial line so you can control up to a total of 16 stepper motors.

    $65.00
    oceancontrols.com.au
  • Serial Stepper Motor Controller 24VDC
    Serial Stepper Motor Controller 24VDC

    Connects to the PC serial port and provides an easy to use interface for connecting and controlling stepper motors by your PC. You can connect up to four Leadshine Microstepping drives, KTA-191 Bipolar Chopper Drive, or KTA-179 Unipolar Stepper Motor Drivers to the card using their step and direction signals. You can multidrop up to 4 interface cards off the 1 RS232 serial line so you can control up to a total of 16 stepper motors.

    $65.00
    oceancontrols.com.au
  • USB Serial Stepper Motor Controller 24VDC
    USB Serial Stepper Motor Controller 24VDC

    Controls 4 axes of stepper or servo motors simultaneously. USB Virtual serial port or RS-­‐485 input. Easily connect multiple units by RS-­‐485 for up to 16 axes. Baud rate selectable. Up to 40 kHz max stepping rate. Parameters can be stored in non-­‐volatile EEPROM. Limit switch input for each motor. 5 VDC step and direction signal levels. XOR checksum option. 2 SPST 5 A Relays for control. 12 or 24 VDC powered versions.

    $79.00
    oceancontrols.com.au
  • USB Serial Stepper Motor Controller 12VDC
    USB Serial Stepper Motor Controller 12VDC

    Controls 4 axes of stepper or servo motors simultaneously. USB Virtual serial port or RS-­‐485 input. Easily connect multiple units by RS-­‐485 for up to 16 axes. Baud rate selectable. Up to 40 kHz max stepping rate. Parameters can be stored in non-­‐volatile EEPROM. Limit switch input for each motor. 5 VDC step and direction signal levels. XOR checksum option. 2 SPST 5 A Relays for control. 12 or 24 VDC powered versions.

    $79.00
    oceancontrols.com.au
  • Serial Stepper Motor Controller - July 2005
    Serial Stepper Motor Controller - July 2005

    $8.20
    siliconchip.com.au
  • 12VDC 48 Step / 7.5° Stepper Motor
    12VDC 48 Step / 7.5° Stepper Motor

    * Standard 48 step / 7.5° design. * Flange mount 3.0mm hardened steel shaft. * Rated voltage: 12VDC. * Rated current: 1.1A/phase. * Phases: 4. * Steps per revolution: 48. * Stepping angle: 7.5°. * Drive method: Unipolar chopper drive. * Resistance per winding: 20 ohms. * Starting frequency: 600pps (max). * Holding torque: 700g.cm.

    $19.95
    www1.jaycar.com.au
  • Modbus Programmable Stepper Motor Controller 12VDC
    Modbus Programmable Stepper Motor Controller 12VDC

    Based on the Serial Stepper Motor Controller, the introduction of a more powerful microcontroller has allowed us to produce a standalone 4 axis stepper motor controller which can be programmed via a PC using supplied software. Alternatively the card can be controlled via a PLC to free the PLC from complex stepper motor control routines. Up to 4 cards can be controlled from a PLC using the Modbus protocol.

    $119.00
    oceancontrols.com.au
  • Modbus Programmable Stepper Motor Controller 24VDC
    Modbus Programmable Stepper Motor Controller 24VDC

    Based on the Serial Stepper Motor Controller, the introduction of a more powerful microcontroller has allowed us to produce a standalone 4 axis stepper motor controller which can be programmed via a PC using supplied software. Alternatively the card can be controlled via a PLC to free the PLC from complex stepper motor control routines. Up to 4 cards can be controlled from a PLC using the Modbus protocol.

    $119.00
    oceancontrols.com.au
  • Bipolar Stepper Motor FL60STH86-2008B
    Bipolar Stepper Motor FL60STH86-2008B

    As an 8 wire motor, the MOT-128 can be wired up in a number of ways. Unipolar configurations use the half coils in sequence and offer about half the torque of the full coil configurations. Parallel and series configurations use the whole coil but require a bipolar driver.

    $69.00
    oceancontrols.com.au